Perky Pear Lift and Shape Tape

Do not use two lifts layered on top of each other, this may cause the skin to overheat and may cause heat bubbles/blisters as below.

Perky Pear Ltd asks customers not to cut or tamper with the product in any way as this can cause strain to the skin to the top.

Rubbing the tape can make the adhesive bond tighter through friction due to it being heat activated so please follow all instructions on the videos and instruction page here.

Do not pull the tape higher than the fleshier part of the breast bone/breast tissue

The tape should be flat and smooth on the skin, any ruching can cause the tape to rub.

Never rip the tape off dry skin like a plaster without oil or moisturiser, this can result in minor tearing and breaking of the skin. Pressing down on the tape whilst pulling is most effective and stops the pull to the skin.

Always use your favorite moisturiser or oil around the edges of the tape to help dissolve the adhesive when removing to stop any pull. Oil based is better as this will dissolve the adhesive.

Start from the bottom corner and pull up gently taking it slowly. Do not peel down and away from the skin.